Spiral Tree Silicone Mold

Our spiral tree molds are the epitome of whimsical and make for the most beautiful holiday decorations, or any time of the year décor! Use them on your table as part of a centerpiece and watch the room come to life!

If you use resin with alcohol inks, they light up beautifully when positioned on top of our USB light. They almost resemble soft-serve ice cream, so please don’t limit yourself to green!

These spiral molds come in two options. One has slightly thinner spiral lines than the other:

• THICK spiral lines, measuring at 4.9" tall x 3.6" wide at the base
• THIN spiral lines, measuring at 4.9" tall x 3.5" wide at the base

These molds are

• Flexible, soft and reusable
• Made of non-toxic food-grade silicone; BPA free
• Heat resistant: -40 to +446 degrees Fahrenheit, (-40 to +230 degrees Celsius)
• Non-stick for easy release

Tips (always follow instructions for the resin you are using - these are meant as general guidelines):

• Always pour your resin into the hardener (pour hardener into the mixing container first, then resin). 
• Stir resin with a plastic or silicone stirring stick to reduce air bubbles. Wood is not recommended as it can create air bubbles.
• Let resin sit a few minutes after stirring to reduce air bubbles.
• Don’t use a torch or heat gun as it could damage the molds and make it difficult to de-mould, causing them to tear - this is especially true near the edges.
• Wash mold as needed in warm soapy water.